Barebone Waveshare

Note: Not compatible with Jetson Nano 2GB Developer Kit Chip: Intel 8265AC. Bands: 2.4GHz/5GHz. Speed: 300Mbps/867Mbps Wi Fi protocol: 802.11ac. Bluetooth version: 4.2. NIC interface: NGFF … (continua)

Onboard SC16IS752, this module is for Raspberry Pi series boards to have 2-ch extra UART and 8 programmable GPIOs It is stackable up to 16 this modules by setting the address jumper, that mean… (continua)

This is an E-Ink display module, 1.54inch, 200x: 200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low powe… (continua)

With standard 40PIN GPIO header, for Raspberry Pi series boards. Onboard USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like STM32;… (continua)

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 latest version 250x: 122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to th… (continua)

Designed for Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboard/Jetson Nano Lead out SPI control interface, suitable for Raspberry Pi/Nucleo main control board, et… (continua)

Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99 Supports SMS, phone call, GPRS, DTMF,… (continua)

5inch Capacitive Touch Display for Raspberry Pi, 800 x 480, TFT Wide Angle, MIPI DSI Interface. DSI interface, refresh rate up to 60Hz. Capacitive touch panel, support 5-point touch. Temper… (continua)

âœThe display orientation is portrait by default, 1440x: 2560 resolution HxV . Change the software config for landscape display. âœFor the moment, only the Raspberry Pi 4B and CM4 have ad… (continua)

Isolated RS485 CAN HAT B for Raspberry Pi, with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, enable isolated and stable RS485 and CAN capability for … (continua)

By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethern… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Breakout SPI control pins, for connecting with host control boards 1-Ch CAN, adopts MCP2515 controller a… (continua)

Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case PoE Power Over Ethernet capabilityï ��'IEEE 802.3af-compliant Fully isolated switched-mode power supply SMPS Smalle… (continua)

Support 5G modules with M. 2 NGFF Key B interface, compatible with SIMCom and Quectel 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules.… (continua)

Onboard QMI8658C+AK09918 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer, detects movement, orientation, and magnetic Standard Raspberry Pi 40PIN GPIO extension header, suppor… (continua)

Suitable for evaluating the raspberry Pi CM4 or being integrated into end products Same size as the CM4, standard CM4 socket, with multiple peripheral interfaces. Onboard 8MP camera module wi… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Onboard QMI8658C+AK09918 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer, detects moveme… (continua)

Provide electronic development resources and manual, please check it carefully before using. With touch-5-inch IPS screen, 800 x 480 hardware resolution. 5-point capacitive touch control, to… (continua)

Provide electronic development resources and manual, please check it carefully before using. No touch-5-inch IPS screen, 800 x 480 hardware resolution. Support Pi: 4B/3B+/3A+/3B/2B/B+/A+, so… (continua)

Provide electronic development resources and manual, please check it carefully before using. No touch-4.3inch IPS Display, 800 x 480 hardware resolution. Support Pi: 4B/3B+/3A+/3B/2B/B+/A+, … (continua)

The ESP32-S3-DEV-KIT-N8R8 is a compact-size micro controller development board with multiple digital interfaces. Tiny size easy integration. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB F… (continua)