Barebone Waveshare

200x: 200, 1.54inch E-Ink Display Module, Three-Color, SPI Interface This is an E-Ink display module, 1.54inch, 200x: 200 resolution, with embedded controller, communicating via SPI interface,… (continua)

This RPi Relay Board B with 8-ch relays in high quality can load up to 5A 250V AC or 5A 30V DC. Onboard standard Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson… (continua)

With 320x: 240 Resolution, 65K RGB Colors Clear and Colorful Displaying Effect. with SPI Interface, requires minimal IO pins Embedded ST7789VW Driver, Using SPI Bus; 2.6 5.5V operating voltag… (continua)

This Converter support USB to RS485 bidirectional conversion. Due to its stable communication, it's ideal for industrial control equipments and/or applications with high communication requir… (continua)

M. 2 interface power supply is limited to 1.5A, if it causes problems such as slowing down of solid state or other equipment, it is recommended to buy version B. Both USB 3/4 and HDMI1 need t… (continua)

Onboard ESP8266, supports development; 802.11b/g/n protocol Interface: 3-wire SPI, 4-wire SPI default ; Operating voltage: 5V; Operating current: 50 m. A 100 m. A; Outline dimension: 29.57mm x… (continua)

Note: Not compatible with Jetson Nano 2GB Developer Kit Chip: Intel 8265AC. Bands: 2.4GHz/5GHz. Speed: 300Mbps/867Mbps Wi Fi protocol: 802.11ac. Bluetooth version: 4.2. NIC interface: NGFF … (continua)

This is an E-Ink display module, 1.54inch, 200x: 200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low powe… (continua)

With standard 40PIN GPIO header, for Raspberry Pi series boards. Onboard USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like STM32;… (continua)

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 latest version 250x: 122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to th… (continua)

Designed for Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboard/Jetson Nano Lead out SPI control interface, suitable for Raspberry Pi/Nucleo main control board, et… (continua)

This is an E-Ink display module, 4.2inch, 400x: 300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing… (continua)

Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99 Supports SMS, phone call, GPRS, DTMF,… (continua)

128 x 128 resolution OLED display, 65K color, can clearly display color pictures Use SPI control to ensure that it does not take up too many interface pins Provide complete supporting informat… (continua)

5inch Capacitive Touch Display for Raspberry Pi, 800 x 480, TFT Wide Angle, MIPI DSI Interface. DSI interface, refresh rate up to 60Hz. Capacitive touch panel, support 5-point touch. Temper… (continua)

âœThe display orientation is portrait by default, 1440x: 2560 resolution HxV . Change the software config for landscape display. âœFor the moment, only the Raspberry Pi 4B and CM4 have ad… (continua)

The ESP32-S3-DEV-KIT-N8R8 is a compact-size micro controller development board with multiple digital interfaces. Tiny size easy integration. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB F… (continua)

The ESP32-S3-DEV-KIT-N8R8-M is a compact-size micro controller development board with multiple digital interfaces. Tiny size easy integration. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB… (continua)

The 1.69inch LCD display module embedded ST7789V2 driver chip, using SPI interface. Compatible with Raspberry Pi,STM32, etc. Comes with online development resources. 240x: 280 resolution, 26… (continua)

SX1262 solution, driver-free, multi-system compatible. Supports multiple operating modes, portable and easy to use. USB-TO-Lo Ra-HF uses TCXO crystal oscillator and is recommended to be use i… (continua)

SX1262 solution, driver-free, multi-system compatible. Supports multiple operating modes, portable and easy to use. The USB-TO-Lo Ra-HF-B uses XTAL crystal oscillator and is recommended to be… (continua)