Waveshare - Tutti i Prodotti

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230. RS485 f… (continua)

128x: 64 Resolution 1.51inch Transparent OLED Display, Light Blue Color Display OLED transparent module, full viewing angle Adopts 4-wire SPI and I2C interface, better compatibility, fast data… (continua)

î€ �Mini Dual Gigabit Ethernet Base Boardî€'Designed for Raspberry Pi Compute Module 4, onboard standard CM4 socket and 40PIN GPIO header, suitable for Compute Module 4 Lite/eMMC serie… (continua)

Integrato Semtech SX1302/3 a banda normale e chip radio anteriore SX1250 RF. Con potenza di +26 d Bm e 141 d Bm ad alta sensibilità La SX1303 supporta il fine Timestamp e la posizione di rete… (continua)

Adopt original CH343G inside, fast communicating, stable and reliable, better compatibility. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power sup… (continua)

RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Tiny size with onboard 1.28inch LCD round display, Li-ion battery recharge manager, 6-axis sensor 3-axis accel… (continua)

6 mm CS-Mount Weitwinkelobjektiv für Raspberry Pi hochwertige Kamera

1.9inch Segment E-Paper Raw Display, 91 Segments, I2C Bus, Ideal For Temperature And Humidity Meter, Humidifier, Digital Meter Support Partial Refresh, Low Power, Wide Viewing Angle, Paper-Lik… (continua)

This industrial RS232/RS485 to Ethernet converter supports Websocket, enables bi-directional transparent data transmission with RS232/RS485 port via webpage directly, and also can be configure… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, Bei … (continua)

2.4inch LCD Display Module, 65K RGB Colors, 240X320 Resolution, SPI Interface 240X320 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins… (continua)

This is a M version with pre-soldered header, a pico-like MCU board based on Raspberry Pi RP2040 Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2… (continua)

296x: 128, 2.9inch E-Ink Display Module, SPI Interface This is an E-Ink display module, 2.9inch, 296x: 128 resolution, with embedded controller, communicating via SPI interface, supports parti… (continua)

800X480, 7.5inch E-Ink Raw Display, SPI Interface, Without PCB This is an E-Ink raw display, 7.5inch, 800X480 resolution, with embedded controller, communicating via SPI interface. Due to the… (continua)

200x: 200, 1.54inch E-Ink Display Module, Three-Color, SPI Interface This is an E-Ink display module, 1.54inch, 200x: 200 resolution, with embedded controller, communicating via SPI interface,… (continua)

This RPi Relay Board B with 8-ch relays in high quality can load up to 5A 250V AC or 5A 30V DC. Onboard standard Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson… (continua)

With 320x: 240 Resolution, 65K RGB Colors Clear and Colorful Displaying Effect. with SPI Interface, requires minimal IO pins Embedded ST7789VW Driver, Using SPI Bus; 2.6 5.5V operating voltag… (continua)

Supports all AVR devices with ISP or PDI interface, and certain 51 Devices Programs both Flash and EEPROM. Supports Fuses and Lock Bit Programming Based on AT AVRISP mkII firmware. Upgradabl… (continua)

Onboard Standard Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano With 6 available microstepping modes, configured with the DIP switches: full-step, half-ste… (continua)

This Converter support USB to RS485 bidirectional conversion. Due to its stable communication, it's ideal for industrial control equipments and/or applications with high communication requir… (continua)

M. 2 interface power supply is limited to 1.5A, if it causes problems such as slowing down of solid state or other equipment, it is recommended to buy version B. Both USB 3/4 and HDMI1 need t… (continua)