Waveshare - Tutti i Prodotti

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. 4-ch monitoring, via I2C/SMBus interface. Onboard 0.1à�© 1ï � sampling resistor, allows measuring bi-… (continua)

Waveshare Industrial Modbus RTU 8-ch Channel Relay Module with RS485 Interface Multi Isolation Protection Circuits with ABS Enclosure Up to 10A Contact Rating

IMX219 Sensor, 8MP, Comes With Infrared LEDs. Embedded IR-CUT, Eliminating The Reddish Issue Of Normal IR Cameras On Daylight. Compatible With Raspberry Pi Compute Module CM3 / CM3+ / CM4. S… (continua)

Compatible With Raspberry Pi Series And Jetson Nano Adopts ADS1263 chip, low noise, low temperature drift, 10-ch 32-bit high precision ADC 5-ch differential input, 38.4kSPS Max sampling rate … (continua)

2.13 capacitive touch e-Paper display, 5-point touch, 250x: 122 pixels,Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power dow… (continua)

Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products. Standard Raspberry Pi CM4 socket and color-code… (continua)

160x: 128 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, requires minimal IO pins Comes with development resources and manual Raspberry Pi Pico C/C++ and Micro… (continua)

1.3 OLED display module for Raspberry Pi Pico, 64x: 128 pixels, embedded SH1107 Driver Adopts both 4-wire SPI and I2C interface, better compatibility, fast data rate 2x user buttons for easy i… (continua)

Risoluzione 320 x 240, schermo IPS, colori 262K, effetto di visualizzazione chiaro e colorato Controller touch dedicato, portando un effetto toccante più fluido rispetto alle soluzioni control… (continua)

2.23 OLED display module for Raspberry Pi Pico, 128x: 32 pixels, embedded SSD1305 driver Adopts both 4-wire SPI and I2C interface, better compatibility, fast data rate Standard Raspberry Pi P… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc Onboard USB… (continua)

Onboard voltage translator, compatible with 3.3V/5V operating voltage I2C communication interface, control the module on/off via IO pins Ranging distance: 40 4000mm,ranging accuracy: ±5%, rang… (continua)

Waveshare BME280 Environmental Sensor, Temperature, Humidity, Barometric Pressure Detection Module Low Power Consumption I2C/SPI Interface for Weather Forecast, IoT Projects, ect

I2C controlled, expands 2 signal pins as 16 I/O pins I2C address configurable by shorting the A0/A1/A2 jumpers Provides two connector options: PH2.0 terminal and/or solder pads, allows multi I… (continua)

The CC Debugger is primarily used for debugging and programming the flash on CCxxxx 8051-based System-on-Chip SoC devices from Texas Instruments CC Debugger also supports CCxxxx RF transceiver… (continua)

USB TO RS232, USB TO RS485, USB TO TTL UART, adopt original FT232RL, fast communicating, stable and reliable, better compatibility Onboard unibody power supply isolation, provides stable isol… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Freescale H-bridge driver MC33886, controls DC motors to turn in both directions; Onboard 5V regulator, p… (continua)

This is a 24-bit high precision barometric pressure sensor, which allows accurate altitude tracing, as well as barometric pressure / temperature measuring Supports I2C default / SPI interface,… (continua)

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C interface, only 2 pins are required for moving and light intensity sensing Onboard TSL25911FN light-to… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano I2C interface, only 2 pins are required for moving and light intensity sensing; Onboard PCA9… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports Multi-GNSS systems: GPS, BDS, and QZSS;Supports DGPS, SBAS WAAS/EGNOS/MSAS/GAGAN E… (continua)