Prodotti di AmazonMarketplace

OV9281-110 Mono Camera,1MP 1280 x 800, Global Shutter, 110°D /93°H /70°V FIELD OF VIEW OV9281-110 Camera Supports 4B / 3B+ / 3A+ / Zero / Zero 2 W,and CM3/3+/4 extra adapter board required Th… (continua)

OV9281-160 Mono Camera,1MP 1280 x 800, Global Shutter, 160°D /126°H /91°V OV9281-160 Mono Camera Supports 4B / 3B+ / 3A+ / Zero / Zero 2 W,and CM3/3+/4 extra adapter board required The Global… (continua)

This RPi Relay Board B with 8-ch relays in high quality can load up to 5A 250V AC or 5A 30V DC. Onboard standard Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson… (continua)

This Converter support USB to RS485 bidirectional conversion. Due to its stable communication, it's ideal for industrial control equipments and/or applications with high communication requir… (continua)

M. 2 interface power supply is limited to 1.5A, if it causes problems such as slowing down of solid state or other equipment, it is recommended to buy version B. Both USB 3/4 and HDMI1 need t… (continua)

Onboard ESP8266, supports development; 802.11b/g/n protocol Interface: 3-wire SPI, 4-wire SPI default ; Operating voltage: 5V; Operating current: 50 m. A 100 m. A; Outline dimension: 29.57mm x… (continua)

Note: Not compatible with Jetson Nano 2GB Developer Kit Chip: Intel 8265AC. Bands: 2.4GHz/5GHz. Speed: 300Mbps/867Mbps Wi Fi protocol: 802.11ac. Bluetooth version: 4.2. NIC interface: NGFF … (continua)

Onboard SC16IS752, this module is for Raspberry Pi series boards to have 2-ch extra UART and 8 programmable GPIOs It is stackable up to 16 this modules by setting the address jumper, that mean… (continua)

This is an E-Ink display module, 1.54inch, 200x: 200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low powe… (continua)

With standard 40PIN GPIO header, for Raspberry Pi series boards. Onboard USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like STM32;… (continua)

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 latest version 250x: 122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to th… (continua)

Designed for Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboard/Jetson Nano Lead out SPI control interface, suitable for Raspberry Pi/Nucleo main control board, et… (continua)

This is an E-Ink display module, 4.2inch, 400x: 300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing… (continua)

Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99 Supports SMS, phone call, GPRS, DTMF,… (continua)

128 x 128 resolution OLED display, 65K color, can clearly display color pictures Use SPI control to ensure that it does not take up too many interface pins Provide complete supporting informat… (continua)

5inch Capacitive Touch Display for Raspberry Pi, 800 x 480, TFT Wide Angle, MIPI DSI Interface. DSI interface, refresh rate up to 60Hz. Capacitive touch panel, support 5-point touch. Temper… (continua)

âœThe display orientation is portrait by default, 1440x: 2560 resolution HxV . Change the software config for landscape display. âœFor the moment, only the Raspberry Pi 4B and CM4 have ad… (continua)

Isolated RS485 CAN HAT B for Raspberry Pi, with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, enable isolated and stable RS485 and CAN capability for … (continua)

By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethern… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN. 2-Ch RS485, adopts SC16I… (continua)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Breakout SPI control pins, for connecting with host control boards 1-Ch CAN, adopts MCP2515 controller a… (continua)