GAF-PiHAT PoE Hat device provides an efficient solution for delivering power to a Raspberry Pi 3B+ or 4 over 328ft of network cable; This device allows power to be carried on 10/100/1000 networks with either 802.3af or passive injectors and switches with a CAT5e, CAT6 or CAT7 Ethernet network cable; This active PoE solution negotiates with the switch to activate the power and provide it to the Pi; The PoE switch supplies 48 or 56 volts of DC at the source location; This PoE to 5-volt converter allows you to operate the Pi up to 328ft or 100 meters from a power source; The form factor is ideal for a Pi case;
especially the CanaKit Premium case; The connector pins are available for GPIO and serial use; There is room for a large heat sink, and the output power is completely regulated and stable, with much less noise than the Raspberry Pi hat; A with rj45 female connector on pi 3 b+ or pi 4 power and data source input, all 4 pairs are active for dataisolated data to powered device ; b power input pins; either polarity for 1&2 and 3&6, 4&5 plus and 7&8 minus for IEEE 802.3af Mode A or B class 3, Max 12.95 watts; C compatible with 44 volts to 57 volts input voltage and the input voltage at 48v is 265 ma input deliver 2 amps out; d max output voltage load 5 volts 2% error 10 watts 2 amps; e 3000 volts isolation from poe side to dc output.
Partner
