" Usb and artnet interface to control two dmx universes with madrix madrix stella is a flexible 2-port network node to control led fixtures receives data over ethernet network art-net and/or streaming acn to convert to dmx512 for your fixtures eliminates the need for extra xlr connectors and converters: directly connect dmx512 to the device over two 3-pin, pluggable screw terminals supports rdm remote device management is especially suited for solid-state projects as it can be mounted on 35-mm din rails or walls via the provided wall-mount brackets provides flexible power options: over 5 v usb or 5 v to 24 v via pluggable screw terminal drives up to 2 dmx universes over 2 ports 1024 dmx channels each port can either be configured as output or input can also be used as madrix usb interface works great with the madrix software sold separately with quick and easy installation sync mode: madrix software and hardware allow you to synchronize art-net data for all output ports and even across multiple devices to get an optimal image on the leds without visual interruptions complies with the official specifications of art-net and streaming acn and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions 2 ethernet ports with daisy-chain support for the data connection without using a separate network switch or router automatic htp merging for two ethernet sources useful settings for channels per universe, channel offset, channel order, and output in case of network connection loss, and more built-in web page for simple on-device configuration 9 status leds, which can be turned off non-conductive enclosure with ip20 and ul94 v-o flammability rating fanless, noiseless, and low-energy design ready within seconds after startup recommended for any small or large project multiple devices can be used together without problems the firmware can be updated for future features quick start guide / technical manual available in english.
Partner
