The expansion tanks of the ultitube series are equipped with a tube made of borosilicate glass, which, in contrast to the plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance; The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm; Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium; The base and lid of the ultitube series are made of resistant acetal and screwed to the glass tube;
A large opening is available for filling the expansion tank after unscrewing the lid; A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles; The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water; The seal in the upper area of the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on;
The pro version of the ultitube d5 has a gas exchange membrane integrated directly into the cover of the expansion tank; Pressure fluctuations caused by temperature changes are continuously compensated via the membrane without coolant being able to escape; An rgbpx-compatible led ring with 13 individually addressable leds is included in the scope of delivery and can be used to effectively illuminate the expansion tank; An aqua computer control unit with rgbpx output is required to operate the led ring e.g. D5 next, not included in the scope of delivery;
At the end of the strip there is a connector for connecting another rgbpx component; A rubber fastening ring with a stainless steel insert is included in the scope of delivery for an additional, vibration-damped fastening of the expansion tank in the upp .
Partner
