The new eiszapfen pro hard tube fittings from alphacool are the next step in development for the familiar eiszapfen fittings; In the development of the fittings alphacool concentrated on a specific problem, deforming petg hard tubes at high temperatures; Petg can start to deform at 60°c. Although such a temperature is usually rarely reached, it can still occur; The eiszapfen pro fittings prevent this problem from the outset and hold the tubes in position;
The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes; Furthermore, the fitting still has an o-ring and a compression seal; However, the contact area is much larger than with normal o-rings, which provides a better grip; With the insert and the compression seal, the tube is strengthened from the inside and outside;
Even under heavy loads the hardtube does not slip; Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing; Technical details: material: brass colour: chrome diameter: 22 mm height: 20 mm thread: g1/4 thread length: 5 mm hardtube size: 13 mm compatibility: petg, acrylic, brass and glass tubes weight: 0.023 kg scope of supply: 1x alphacool eiszapfen pro 13 mm hardtube fitting g1/4; deep black sixpack notice: attention: the manufacturer mayhems advises that mayhems fluids, especially the aurora line of products, have been manufactured and distributed solely for show and modding purposes;
These should not be utilized in the system for more than 14 days; We would also like to advise that mayhems fluids can damage water cooling products, and using mayhems fluids can thereby void the warranties offered by the following manufacturers: koolance, phobya, alphacool, aqua computer, watercool; Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc; , are a consequence of the use of mayhems, but will not be reimbursed by mayhems;
Use is therefore at one's own risk.
Partner
