" The alphacool es solution laing ddc310 pump serves as the foundation for various 1 to 4u server solutions from alphacool; The unit is based around the very popular alphacool ddc pump and has been coupled with a simple pump base to maintain compatibility with various enterprise solution reservoirs; Compact and powerful; The flat design of the laing ddc310 pump saves space and fits with the corresponding enterprise reservoirs from chassis as small as a 1u server rack;
This results in a very powerful pump that can be used in the smallest of spaces; The ddc310 variant offers with a delivery height of 2.44m enough power to operate an extensive water loop; The performance is enough to operate a dual or quad socket system including reservoir and radiators; The performance of the pump is also sufficient to operate a render server with up to 4 graphics cards;
Spherical ceramic bearing the pump uses a shaftless ball motor or spherical bearing; The motor is driven by magnets while the rotor is mounted on a ball-ceramic bearing; This makes the pump maintenance-free, as the bearing is self-adjusting and maintenance-free; The pump is lubricated by the coolant during operation;
This makes the alphacool es solution laing ddc310 pump a so-called wet rotor pump; Due to its design, even small particles of dirt are no problem for the pump; Installation and commissioning the pump is delivered with a classic plastic bottom which ensures a high compatibility to all enterprise solution products; However, the pump can also be mounted on all existing ddc pump tops from alphacool;
The pump comes with a corresponding o-ring, only the mounting screws must be used from the respective reservoir, as these may differ in length; The power is supplied via a 4-pin molex connector, the speed can be read out via a 3-pin molex connector; This is usually done via the 3-pin fan connector on the mainboard or via an appropriate fan controller; Technical data: l x w x h: 62 x 62 x 28 mm weight: 167 g..
Partner
