The step towards perfection the new alphacool agb comes in three different models; You can either connect a laing ddc, the alphacool dc-lt or the laing d5 / alphacool vpp655 at the backplate depending on the model which you use; The brushed plate provides an optical finishing touch which is underlined by the high quality processing; The front consists of a scretch-secure soft-touch surface painted in black-matt;
The eisfach is mounted in two of the front 5.25 bays which provides a good overview of the container and the fill level is easily being checked through the lighted window at the back; Additionally, the alphacool logo in the front can be lighted by connecting the 3-pin connector with a power source; A lot of details complement the first impression two 1/4" holes at the top side are available for the first filling; To refill you can simply remove and extract the fillport in the front and two 1/4" holes at the bottom side facilitate the draining of the liquid;
There are two lighting modules at the right hand side at the back of the container behind the window for 5 mm leds; This provides a unique opportunity for personalised lighting and optic; Further two holes at the left hand side provide additional opportunities to fill or drain the liquid; The last two 1/4" threads are used to fill or drain the container;
A bubble down module has been placed behind the inlet to prevent turbulences that could lead air into the watercircle; Technical data: material: plastic and metal color: black measurements lxdxh: 148 x 132 x 84.5 mm connector thread: 10x 1/4" lighting: 2x 5 mm led scope of delivery: 1x alphacool eisfach mounting material please note: the container is being delivered without a pump; Please order one seperately or together with this on as a set Download 3d-file; stp.
Partner
