Display Oled Waveshare

High-Performance MCU: The RP2350-Touch-AMOLED-2.41 is equipped with a powerful RP2350B microcontroller, featuring a dual-core design with ARM Cortex-M33 or RISC-V processors, running at speeds… (continua)

1.32inch OLED display module, 128x: 96 resolution, 16 gray scale, embedded SSD1327 driver chip, GH1.25 7Pin connector, 3.3V / 5V operating voltage Adopts 4-wire SPI and I2C interfaces, better … (continua)

1.54inch OLED display module compatible with Raspberry Pi, Arduino, STM32, ESP32, Jetson Nano, etc. 1.54inch OLED screen display, blue display color, 128 x 64 pixels, embedded SSD1309 driver … (continua)

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE, with onboard antenna. Built in 512KB of S… (continua)

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi 802.11 b/g/n and BT 5 LE, with an onboard antenna. Supports switchin… (continua)

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE, with onboard antenna. Built in 512KB of S… (continua)

ESP32-S3-Touch-AMOLED-2.41, standard version, without case. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 3… (continua)

High-Performance MCU: The RP2350-Touch-AMOLED-2.41 is equipped with a powerful RP2350B microcontroller, featuring a dual-core design with ARM Cortex-M33 or RISC-V processors, running at speeds… (continua)